Tokyo and Kawasaki, Japan, October 8, 2013 — Fujitsu Limited and Fujitsu Laboratories Ltd. today announced that they have developed a low-noise signal-generating circuit that can be used in automotive radar and other millimeter-band transceivers.
In recent years, to enhance the resolution of radar and expand the capacity of wireless communications, efforts have been focused on developing transceivers operating in the millimeter-band frequency range above 30 GHz. To raise the performance of millimeter-band transceivers and be able to produce them in mass quantities, it is necessary to use silicon-based semiconductors rather than the compound semiconductors that have been used up until now. The problem, however, has been the difficulty of generating low-noise signals in the millimeter band.
Fujitsu has now developed a low-noise signal-generating circuit which consists of multiple comparators for operating sequential comparisons to reference signal. In doing so, they succeeded in reducing unwanted noise in the millimeter-band signal by 5 dB, to roughly one-third of previous levels, paving the way for the production of fully integrated millimeter-band transceiver circuits implemented on silicon semiconductors.
This technology is expected to make a significant contribution to raising the performance – and enabling the mass production – of automotive radars and other millimeter-band transceivers. A portion of these results were obtained through "Advanced Research on 79GHz-band Radar Systems," a research program commissioned by Japan's Ministry of Internal Affairs and Communications as part of its "Research and Development project for Expansion of Radio Spectrum Resources".
Details on this technology will be announced at the European Microwave Integrated Circuits Conference 2013 (EuMIC 2013), which opens October 6 in Germany.
Background
In recent years, to enhance the resolution of radar and expand the capacity of wireless communications, efforts have been focused on developing transceivers operating in the millimeter-band frequency range above 30 GHz. For the high frequency integrated circuits (ICs) used to send and receive millimeter-band signals, compound semiconductors, whose physical properties are well-suited to high frequency applications, are being used (Figure 1). To integrate the features of a signal-processing circuit on a single chip, raise its level of performance, and enable it to be mass manufactured, however, silicon is more suitable than compound semiconductors (Figure 2). That is why research efforts have focused on creating millimeter-band transceiver ICs using silicon semiconductors.
Technological Challenges
Millimeter-band transceiver ICs need a signal-generating circuit to generate millimeter-band signals. Conventional millimeter-band signal-generating circuits compare the low frequency comparator signals, which are divided from the frequency of millimeter-band oscillator signals, to the low-noise, highly stable reference signals from the reference oscillator. They then synchronize these two signals to generate low-noise, highly stable signals (Figure 3). Because the reference signal and comparator signal share the same frequency and a comparison is made one time for each cycle of the reference signal, the phase difference signal of the comparison results cannot be made sufficiently large compared to the noise generated from the phase difference detection circuits, and results in the problem of high levels of noise. In particular, because the level of noise generated by the transistors made of silicon semiconductors is high compared to that of compound semiconductors, there has been a need for circuit technology that generates low-noise and highly stable millimeter-band signals.
Figure 3. Conventional signal-generating circuit and timing illustration
About the New Technology
The newly developed technology employs a new architecture in which multiple phase difference detection circuits and delay circuits are connected in a line, enabling multiple comparisons to be made. In the new circuit, the frequency of the comparison signal is raised and, furthermore, the reference signal is split into multiple signals, enabling multiple comparisons per cycle. A phase difference signal is generated from each comparison, and because there are now more differential signals, their relative size, in relation to the noise generated by the phase difference detection circuit, is now larger, thereby enabling a reduction in the impact of the generated noise. Signal noise was successfully reduced by 5 dB below previous levels, resulting in approximately just one-third of the previous noise level.
Figure 4. Newly-developed signal-generating circuit and timing illustration
Results
The use of these technologies paves the way to the production of millimeter-band transceiver ICs implemented on silicon semiconductors. Accordingly, they are expected to make a significant contribution to raising the performance – and enabling the mass production – of automotive radars and other millimeter-band transceivers. Moreover, because the lower noise reduces electricity consumption and lowers the number of parts needed in a radar, they also will contribute to reducing burden on the environment.
Future Plans
In applying these technologies, Fujitsu plans to develop a single-chip millimeter-band transceiver IC module.
About Fujitsu
Fujitsu is the leading Japanese information and communication technology (ICT) company offering a full range of technology products, solutions and services. Approximately 170,000 Fujitsu people support customers in more than 100 countries. We use our experience and the power of ICT to shape the future of society with our customers. Fujitsu Limited (TSE: 6702) reported consolidated revenues of 4.4 trillion yen (US$47 billion) for the fiscal year ended March 31, 2013. For more information, please see http://www.fujitsu.com.
About Fujitsu Laboratories
Founded in 1968 as a wholly owned subsidiary of Fujitsu Limited, Fujitsu Laboratories Ltd. is one of the premier research centers in the world. With a global network of laboratories in Japan, China, the United States and Europe, the organization conducts a wide range of basic and applied research in the areas of Next-generation Services, Computer Servers, Networks, Electronic Devices and Advanced Materials. For more information, please see: http://jp.fujitsu.com/labs/en.
